Induced Draft Blower

Our induced draft blowers are high volumetric and are generally used to handle hot gases or hot air. Below 80°C, the blowers may be direct driven type, but above this they are either belt driven or driven through flexible couplings. Induced draft blowers can be supplied in M.S., S.S. construction.

These are high volumetric but low pressure blowers generally used to handle hot gases or hot air. Below 80°C, the blowers may be direct driven type, but above this they are either belt driven or driven through flexible couplings. Induced draft blowers can be supplied in M.S., S.S. construction. Mild Steel is suitable for working upto 300°C, whereas with S.S. construction, they can be used upto 600°C with ‘V’ belt or flexible drive, and with water cooled bearings they can work satisfactorily at as high as 1000°C. The impellers are in welded construction and are statically & dynamically balanced.

Vinayak’s also makes SPECIAL BLOWERS for extra high temperatures upto 1000°C, in which bearings and shaft are continuously cooled with running water. Oil lubrication for the bearings also can be provided.

Different sizes are available to suit individual requirements of customers in M.S. and / or S. S. construction with horizontal or vertical mounting arrangement.

• ½ H.P. to 100 H.P. capacities
• 1, 60,000 CFM (2,75,000m³/hr )
• Static pressures of 25 to 300 MMWG ( 1˝ to 12˝ WG)

• 720, 960, 1440 and 2880 RPM
• Direct drive and flexible coupling drives
• ‘V’ – belt drive arrangement
• Infinite speed combinations
• Extra high temperatures up to 1000°
• Oil lubrication for the bearings is provided

• Chemical & Pharma Company
• Hotels
• Steel Manufacturing Industries
• Non- Ferrous metal Manufacturing Industries
• Allied Industries